3-3 f low c ontrol e quipment s peed c ontrollers for further technical details on this product request catalogue reference e201-g & e505 flow control equipment castle hill nsw.............tel: (02) 680 3222.....fax: (02) 894 5719 order lines tel: 01-501822 fax: 01-502710 order lines see inside front cover for details of your local sales office v tube size applicable tube body size ?3.2 ?4 ?6 ?8 ?10 ?12 as1001f tmh-23j tmh-04j tmh-06j as2001f tmh-07 as2051f tmh-08 as3001f as4001f tmh-10 tmh-12 s peed c ontroller w ith o ne t ouch f ittings : i n -l ine t ype s eries as1001f, 2001f, 2051f, 3001f, 4001f minimises installation time and cost accepts nylon and polyurethane tubing wide variety of sizes speed may accurately be controlled even at low velocity constant speed easily set retainer prevents accidental loss of needle optional holder gives flexibility of mounting s ymbols d imensions as1000-4000 as 1f 100 m5 (04,06) 200 1 M 8 (04,06) 205 1 M 4 (06,08) 300 3 M 8 (06,08, 10, 12) 400 1 M 2( 10,12) b ody s ize w ith o ne -t ouch f ittings 04 ?4 06 ?6 08 ?8 10 ?10 12 ?12 a pplicable t ube o.d. h ow t o o rder as1000-4000 t echnical s pecifications proof pressure 1.5mpa (15.3kgf/cm 2 ) operating pressure range 0.1~1.0mpa ambient and fluid temperature 0~60c number of needle rotations 10 turns (8 turns)* *as1001f type a ccessories m ounting b racket C n ow also white l3 model applicable tube o.d. (d) d1 d2 l1 l2 max min m1 as1001f 4 9.3 39.2 5.2 24.2 21.4 12.8 6 11.6 10 40.7 6.2 25.2 22.4 13.7 as2001f 4 9.3 11.8 40.7 5.2 32.6 27.6 12 6 11.6 44 6.3 33.7 28.7 13.7 as2051f 6 12 14.8 53.2 6.7 35.2 30.2 16.8 8 15.2 59.8 8.1 36.5 31.5 18 6 12 59 7.4 38.3 33.3 16.8 8 15.2 64.4 8.2 39.1 34.1 18 10 18.5 71.6 9.8 40.6 35.6 21 as3001f 12 20.9 19.8 76 11 41.8 36.8 22 10 18.5 26. 5 51.1 43.6 21 as4001f 12 20.9 82.1 11. 3 52.1 44.6 22 s tocked p roducts f or a list of s tocked p roducts , please see the current smc p rice l ist s pecial o ption black body with blue bush (same dimensions) order with -x35 suffix. this also applies for black tmh mounting brackets.
3-4 f low c ontrol e quipment s peed c ontrollers for further technical details on this product request catalogue reference e201-g & e505 flow contr ol equipment s peed c ontroller w ith o ne t ouch f ittings to m5, r(pt) and u ni t ype m ale t hreads s eries as 1 1f 2 1f 3 1f 4 1f minimises installation time and cost accepts nylon and polyur ethane tubing w ide variety of sizes body swivels 360o accurate speed contr ol even at low velocity constant speed easily set retainer pr events accidental loss of contr ol needle a vailable as elbow or universal body types w ith meter -in or meter -out contr ol as standar d options optional npt thr eads and inch tubing versions with meter -in or meter -out contr ol as standar d optionsC ask smc regional of fices for details s ymbols t echnical s pecifica tions d imensions s ee n ext p age + h ow t o o r d e r s ee n ext p age + fluid air max. operating pr essur e 1mpa{10.2kgf/cm 2 } min. operating pr essur e 0.1mpa{1kgf/cm 2 } pr oof pr essur e 1.5mpa{15.3kgf/cm 2 } ambient and fluid temperatur e 0 ~ 60 c number of needle r evolutions 10 tur ns (m5 size: 8 tur ns) applicable tube material nylon, soft nylon, polyur ethane mounting thr ead m5, r(pt), uni thr ead option hexagonal lock nut, nickel plated type note1 , sealant on r(pt) note2 note 1: brass par ts ar e all electr oless nickel plated. m5 size ar e nickel plated as standar d. note 2: m5 and unithr ead have gasket seal as standar d. indication on pr oduct model as12 1f as22 1f-01 as22 1f-02 as32 1f as42 1f as13 1f as23 1f-01 as23 1f-02 as33 1f as43 1f t ube od (mm) 4,6 4 6,8,10 4 6 8,10 6 8 10,12 10 12 thr ead type m5 r(pt) or unithr ead contr olled (fr ee) air flow , /min (anr) 100 180 230 260 390 460 660 790 920 1580 1710 flow ef fective orifice (mm 2 ) 1.5 2.7 3.5 4 6 7 10 12 14 24 26 a ir f low e ffective o rifice supply pr essur eC0.5mpa{5.1kgf/cm2} t empr eatur e 20 c : contr ol method (0: meter -out; 1: meter -in) elbow type universal t ype por t size applicable tube od applicable cylinder (thr ead) 4 6 8 10 12 bor e size (mm) as12 1f as13 1f m5 x 0.8 6, 10, 15, 20 as22 1f-01 as23 1f-01 1/8 r(pt) 20, 25, 32 as22 1f-02 as23 1f-02 1/4 r(pt) 20, 25, 32, 40 as32 1f-02 as33 1f-02 1/4 r(pt) 40, 50, 63 as32 1f-03 as33 1f-03 3/8 r(pt) 40, 50, 63 as42 1f-04 as43 1f-04 1/2 r(pt) 63, 80, 100 as22 1f-u01 as23 1f-u01 1/8 uni- 20, 25, 32 as22 1f-u02 as23 1f-u02 1/4 uni- 20, 25, 32, 40 as32 1f-u03 as33 1f-u03 3/8 uni- 40, 50, 63 as42 1f-u04 as43 1f-u04 1/2 uni- 63, 80, 100 m odel /r ange
3-5 f low c ontrol e quipment s peed c ontrollers for further technical details on this product request catalogue reference e201-g & e505 flow contr ol equipment castle hill nsw ............. tel: (02) 680 3222 ..... fax: (02) 894 5719 order lines t el: 01-501822 fax: 01-502710 order lines see inside front cover for details of your local sales office v as 1f 1 m5 2 1 M 8 , 1 M 4 3 3 M 8 4 1 M 2 b ody s ize w ith o ne -t ouch f ittings 04 ?4 06 ?6 08 ?8 10 ?10 12 ?12 a pplicable t ube o.d. h ow t o o r d e r 2 elbow 3 universal t ype 0 meter out 1 meter in c ontrol m ethod m5 m5 01 1 M 8 02 1 M 4 03 3 M 8 04 1 M 2 p or t s ize nil r(pt) m5 u uni thr ead p or t t hread s sealant (not uni-thr ead) k hex lock nut n nickel plating o ption note: elbow type models ar e also available with push- in system for connection to other one-touch fittings. ask your smc regional of fice about series as1000p , 2000p , 3000p , 4000p . s pecial o ption black body/blue bush (same dimensions) or der as -x35 suf fix. model applicable t h d1 d2 l1 l2 l3 l4 a m1 t ube od d max min max min as12 1f-m5-04 4 m5x0.8 8 9.3 9.6 17.3 22.1 12.3 28.6 25.8 25.0 22.2 12.7 as12 1f-m5-06 6 m5x0.8 8 11.6 9.6 10.1 22.9 11.7 28.6 25.8 25.0 22.2 13.5 *as22 1f-01-04 4 1/8 12 9.3 14.2 20.4 27.5 14.3 36.1 31.1 32.1 27.1 12.7 as22 1f-01-06 6 1/8 12 11.6 14.2 20.4 27.5 14.3 36.1 31.1 32.1 27.1 13.5 as22 1f-01-08 8 1/8 12 15.2 14.2 25.3 32.4 14.3 36.1 31.1 32.1 (30.5) 27.1 (25.5) 18.5 as22 1f-01-10 10 1/8 12 18.5 14.2 33.1 40.2 15.0 36.1 31.1 32.1 (30.5) 27.1 (25.5) 21.0 *as22 1f-02-04 4 1/4 17 10.4 18.5 25.2 34.4 18.2 40.4 (39.4) 35.4 (34.4) 34.4 (32) 29.4 (26.6) 15 as22 1f-02-06 6 1/4 17 12.8 18.5 25.2 34.4 18.2 40.4 (39.4) 35.4 (34.4) 34.4 (32) 29.4 (26.6) 16.8 as22 1f-02-08 8 1/4 17 15.2 18.5 27.2 36.4 18.2 40.4 (39.4) 35.4 (34.4) 34.4 (32) 29.4 (26.6) 18.5 as22 1f-02-10 10 1/4 17 18.5 18.5 33.9 43.2 20.0 40.4 (39.4) 35.4 (34.4) 34.4 (32) 29.4 (26.6) 21.0 *as32 1f-03-06 6 3/8 19 12.8 23.0 27.8 39.3 20.9 46.5 (45) 41.5 (40) 40 (37.6) 35.0 (32.6) 16.8 as32 1f-03-08 8 3/8 19 15.2 23.0 29.5 41 20.9 46.5 (45) 41.5 (40) 40 (37.6) 35.0 (32.6) 18.5 as32 1f-03-10 10 3/8 19 18.5 23.0 31.8 43.3 20.9 46.5 (45) 41.5 (40) 40 (37.6) 35.0 (32.6) 21.0 as32 1f-03-12 12 3/8 19 20.9 23.0 32.8 44.3 20.9 46.5 (45) 41.5 (40) 40 (37.6) 35.0 (32.6) 22.0 *as42 1f-04-10 10 1/2 24 18.5 28.6 33.6 47.9 25.4 57.6 (54.6) 50.1 (47.1) 49.6 (44.5) 42.1 (37.0) 21.0 as42 1f-04-12 12 1/2 24 20.9 28.6 34.6 48.9 25.4 57.6 (54.6) 50.1 (47.1) 49.6 (44.5) 42.1 (37.0) 22.0 * standar d version and unithr ead version dimensions ar e the same except ( ) which ar e unithr ead dimensions only d imensions e lbow t ype r(pt) m5
3-6 f low c ontrol e quipment s peed c ontrollers for further technical details on this product request catalogue reference e201-g & e505 flow contr ol equipment model applicable t h d1 d2 d3 l1 l2 l3 l4 l5 a note1 m1 t ube od d max min max min as13 1f-m5-04 4 m5x0.8 8 9.3 9.6 9.3 10.8 20.3 17.5 20.7 28.6 25.8 25 22.2 12.9 as13 1f-m5-06 6 m5x0.8 8 11.6 9.6 9.3 10.8 21.4 20.6 31.8 28.6 25.8 25 22.2 12.9 *as23 1f-01-04 4 r(pt) 1/8 12 9.3 14.2 9.3 13.1 24.9 17.5 31.8 36.1 31.1 32.1 (30.5) 27.1 (25.5) 12.9 as23 1f-01-06 6 r(pt) 1/8 12 11.6 14.2 109 14 26.9 22.9 37.2 36.1 31.1 32.1 (30.5) 27.1 (25.5) 13.7 as23 1f-01-08 8 r(pt) 1/8 12 15.2 14.2 12.9 16.2 30.9 20.2 41.7 36.1 31.1 32.1 (30.5) 27.1 (25.5) 10.7 *as23 1f-02-04 4 r(pt) 1/4 17 10.4 18.5 10.9 16.2 30.6 21.9 40.1 40.4 (39.4) 35.4 (34.4) 34.4 (32) 29.4 (26.6) 15.8 as23 1f-02-06 6 r(pt) 1/4 17 12.8 18.5 12.9 18.4 34 25.2 42.6 40.4 (39.4) 35.4 (34.4) 34.4 (32) 29.4 (26.6) 16 as23 1f-02-08 8 r(pt) 1/4 17 15.2 18.5 12.9 18.3 35.2 28.2 45.6 40.4 (39.4) 35.4 (34.4) 34.4 (32) 29.4 (26.6) 18.7 as23 1f-02-10 10 r(pt) 1/4 17 18.5 18.5 12.9 20.2 38.7 31 48.4 40.4 (39.4) 35.4 (34.4) 34.4 (32) 29.4 (26.6) 20.8 *as33 1f-03-6 6 r(pt) 3/8 19 12.8 23 12.9 20.6 38.5 25.2 47 48.8 (45) 43.8 (40) 42.8 (37.6) 37.8 (32.6) 21.8 as33 1f-03-8 8 r(pt) 3/8 19 15.2 23 12.9 20.6 39.7 28.2 50 48.8 (45) 43.8 (40) 42.8 (37.6) 37.8 (32.6) 18.7 as33 1f-03-10 10 r(pt) 3/8 19 18.5 23 16.2 23 43.7 32.6 54.4 48.8 (45) 43.8 (40) 42.8 (37.6) 37.8 (32.6) 20.8 as33 1f-03-12 12 r(pt) 3/8 19 20.9 23 16.2 23 44.9 34.4 56.2 48.8 (45) 43.8 (40) 42.8 (37.6) 37.8 (32.6) 21.8 *as43 1f-04-10 10 r(pt) 3/8 24 18.5 28.6 16.2 25.8 49.4 32.6 58 57.6 (54.6) 50.1 (47.1) 49.4 (44.5) 41.9 (37) 20 as43 1f-04-12 12 r(pt) 3/8 24 21.7 28.6 19.4 26.8 52 36.3 61.7 57.6 (54.6) 50.1 (47.1) 49.4 (44.5) 41.9 (37) 21 d imensions u niversal t ype note 1): dimensions measur ed after m5 and (r(pt) ar e scr ewed in. * standar d version and unithr ead version dimensions ar e the same except ( ) which ar e unithr ead dimensions only r(pt) m5
3-7 f low c ontrol e quipment s peed c ontrollers for further technical details on this product request catalogue reference e201-g & e505 flow contr ol equipment castle hill nsw ............. tel: (02) 680 3222 ..... fax: (02) 894 5719 order lines t el: 01-501822 fax: 01-502710 order lines see inside front cover for details of your local sales office v s peed c ontroller with o ne t ouch f ittings ; s t ainless s teel t ype s eries as 12 1fg 22 1fg 32 1fg 42 1fg stainless steel elements (sus 303). suitable for copper fr ee specification and water/salt water washdown of food pr ocessing machines white r esin body/r elease bush optional pr e-coated thr ead maximum operating pr essur e 1.0mpa accepts nylon, soft nylon and polyur ethane tubing retainer pr events accidental needle loss constant easy speed setting with 10 tur ns of needle r otation t echnical s pecifica tions pr oof pr essur e 1.5mpa{15.3kgf/cm 2 } max. operating pr essur e 1mpa{10.2kgf/cm 2 } min. operating pr essur e 0.1mpa{1kgf/cm 2 } ambient and fluid temperatur e 0 ~ 60 c number of needle r evolutions 10 tur ns (8 tur ns note1 ) applicable tube material nylon, soft nylon, polyur ethane option w ith sealant note2 note 1: applicable tube to as12*fg note 2: not available for m5 thr eads elbow type por t size fr ee contr ol flow (n , /min) /ef fective orifice (mm 2 ) applicable t ube by applicable tube 4 6 8 10 12 as12*1fg-m5 m5x0.8 100/1.5 100/1.5 6, 10, 16, 20 as22*1fg-01 r(pt)1/8 180/2.7 230/3.5 230/3.5 230/3.5 20, 25, 32 as22*1fg-02 r(pt)1/4 260/4 390/6 460/7 460/7 20, 25, 32, 40 as32*1fg-04 r(pt)3/8 660/10 790/12 920/14 40, 50, 63 as42*1fg-04 r(pt)1/2 1580/24 1710/26 63, 80, 100 t echnical s pecifica tions h ow t o o r d e r as 2 1f g 1 m5 2 1/8, 1/4 3 3/8 4 1/2 b ody s ize 2 elbow t ype 0 meter out 1 meter in c ontrol m ethod w ith o ne t ouch f itting nil none s with sealant o ption 04 ?4 06 ?6 08 ?8 10 ?10 12 ?12 a pplicable t ube o.d s t ainless s teel t ype (sus303) m5 m5x0.8 01 r(pt)1/8 02 r(pt)1/4 03 r(pt)3/8 04 r(pt)1/2 p or t s ize model applicable t h d1 d2 l1 l2 l3 l4 a note1 m1 t ube od d max min max min as12 1fg-m5-04 4 m5x0.8 8 9.3 9.6 17.3 22.1 12.3 28.6 25.8 25 22.2 12.7 as12 1fg-m5-06 6 m5x0.8 8 11.6 9.6 18.1 22.9 11.7 28.6 25.8 25 22.2 13.5 as22 1fg-01-04 4 r(pt) 1/8 12 9.3 14.2 20.4 27.5 14.3 36.1 31.1 32.1 27.1 12.7 as22 1fg-01-06 6 r(pt) 1/8 12 11.6 14.2 20.4 27.5 14.3 36.1 31.1 32.1 27.1 13.5 as22 1fg-01-08 8 r(pt) 1/8 12 15.2 14.2 25.3 32.4 14.3 36.1 31.1 32.1 27.1 18.5 as22 1fg-02-10 10 r(pt) 1/8 12 18.5 14.2 33.1 40.2 15 36.1 31.1 32.1 27.1 21 as22 1fg-02-04 4 r(pt) 1/4 17 10.4 18.5 25.2 34.4 18.2 40.4 35.4 34.4 29.4 15 as22 1fg-02-06 6 r(pt) 1/4 17 12.8 18.5 25.2 34.4 18.2 40.4 35.4 34.4 29.4 16.8 as22 1fg-02-08 8 r(pt) 1/4 17 15.2 18.5 27.2 36.4 18.2 40.4 35.4 34.4 29.4 18.5 as22 1fg-02-10 10 r(pt) 1/4 17 18.5 18.5 33.9 43.2 20 40.4 35.4 34.4 29.4 21 as32 1fg-03-6 6 r(pt) 3/8 19 12.8 23 27.8 39.3 20.9 46.5 41.5 40 35 16.8 as32 1fg-03-8 8 r(pt) 3/8 19 15.2 23 29.5 41 20.9 46.5 41.5 40 35 18.5 as32 1fg-03-10 10 r(pt) 3/8 19 18.5 23 31.8 43.3 20.9 46.5 41.5 40 35 21 as32 1fg-03-12 12 r(pt) 3/8 19 20.9 23 32.8 44.3 20.9 46.5 41.5 40 35 22 as42 1fg-04-10 10 r(pt) 1/2 24 18.5 28.6 33.6 47.9 25.4 57.6 50.1 49.6 42.1 21 as42 1fg-04-12 12 r(pt) 1/2 24 20.9 28.6 34.6 48.9 25.4 57.6 50.1 49.6 42.1 22 note 1: dimensions measur ed when thr ead has been scr ewed in. d imensions note: supply pr essur e 0.5mpa t emperatur e 20 c
3-8 f low c ontrol e quipment s peed c ontrollers for further technical details on this product request catalogue reference e201-g & e505 flow contr ol equipment f lame r esist ant s peed c ontroller with o ne t ouch f ittings and m et al b ody s eries as 12 1C Cf 22 1C Cf 32 1C Cf 42 1C Cf metal body and flame r esistant r esin one-touch fitting cassette (to ul94 standar d v -0) ideal for heavy duty application can be used in conjunction with other flame r esistant fittings and tubing (see section 4 of this catalogue). t echnical s pecifica tions pr oof pr essur e 1.5mpa{15.3kgf/cm 2 } max. operating pr essur e 1mpa{10.2kgf/cm 2 } min. operating pr essur e 0.1mpa{1kgf/cm 2 } ambient and fluid temperatur e 0 ~ 60 c number of needle r evolutions 10 tur ns (8 tur ns note1 ) applicable tube material nylon, soft nylon, polyur ethane option w/seal, hexagon lock nut, nickel plating type h ow t o o r d e r as 2 1 m5 standar d 2 01, 02 standar d 3 03 standar d 4 04 standar d b ody s ize 2 elbow t ype 0 meter out 1 meter in c ontrol m ethod s with sealant k hexagon lock nut n nickel plating type the option sequence must be skn o ption 04 ?4 06 ?6 08 ?8 10 ?10 12 ?12 t ube p or t s ize m5 m5x0.8 01 r(pt)1/8 02 r(pt)1/4 03 r(pt)3/8 04 r(pt)1/2 t hread s ize 1 f b uil t - in o ne touch fitting model applicable t h d1 d2 l1 l2 l3 l4 a note1 m1 mass t ube od d max min max min as12 1-m5-f04 4 m5x0.8 8 13 9 21 25.5 11.2 28.8 25.5 25 22.2 16 12.7 as12 1-m5-f06 6 m5x0.8 8 13 9 21.5 26 11.2 28.8 25.5 25 22.2 17 12.5 as22 1-01-f06s 6 r(pt) 1/8 12 15.5 14.6 26.6 33.9 14.7 36.4 31.4 32.4 27.4 17 33.7 as22 1-01-f08s 8 r(pt) 1/8 12 15.5 14.6 26.6 33.9 14.7 36.4 31.4 32.4 27.4 18.5 30.7 as22 1-02-f06s 6 r(pt) 1/4 17 15.5 19.5 28.7 38.5 17.7 40.8 35.8 34.8 29.8 17 56.3 as22 1-02-f08s 8 r(pt) 1/4 17 15.5 19.5 28.7 38.5 17.7 40.8 35.8 34.8 29.8 18.5 52.1 as32 1-03-f08s 8 r(pt) 3/8 19 18.2 24.3 32.7 44.9 20.1 46.9 41.9 40.6 35.6 18.5 92.9 as32 1-03-f10s 10 r(pt) 3/8 19 18.2 24.3 33.3 45.5 20.1 46.9 41.9 40.6 35.6 21 87.6 as42 1-04-f10s 10 r(pt) 1/2 24 22.3 28.5 36.1 50.4 25.5 55.6 50.6 47.4 42.4 21 153.8 as42 1-04-f12s 12 r(pt) 1/2 24 22.3 28.5 36.1 50.4 25.5 55.6 50.6 47.4 42.4 22 145.5 note: dimensions measur ed when thr ead has been scr ewed in. d imensions model as12 1-m5-f* as22 1-01-f* as22 1-02-f* as32 1-03-f* as42 1-04-f* applicable t ube od (mm) ?4, ?6 ?4, ?6 ?6 ?8 ?8 ?10 ?10 ?12 contr olled (fr ee) air flow , /min (anr) 100 230 390 460 790 920 1580 1710 flow ef fective orifice (mm 2 ) 1.5 3.5 6 7 12 14 24 26 id of applicable cylinders (mm) 6,10, 16, 20 20, 25, 32 20, 25, 32, 40 40, 50, 63 63, 80, 100
|
